Hello DIY Decor friends!!
Once it dries, apply antiquing glaze to the entire surface and then wipe it away. This will give your board a weathered look. Now it’s time to make mould castings.
I used the small angels, the garland and tassels, and the beaded moulding you see here, for this project. I pressed the clay into the moulds to create the castings and then set them aside as the glaze dried on my board. A little tip: lightly brush the insides of your moulds with a bit of cornstarch to help the clay release super quick and easy.
Apply the moulds to your completely dry board with wood glue. Make sure the glue is applied all the way to the edges of your casting so that it adheres really well all the way around. You can glue the castings to your board while the clay is still wet.
This is what your board will look like once everything is glued into place. At this point, I set it aside and let the mould castings dry overnight.
The next step is to dry brush the entire piece with the blue chalky finish paint. Then I used a smaller, detail brush to completely cover all of the mouldings with the paint.
Once dry, use another small brush to paint just the mouldings with the gold acrylic paint.
Once that step is complete, your project will look like this. The next step is where the magic happens. Antiquing glaze!!
Dip your paper towel into the glaze
and start applying it all over your project. This is where you can customize the look that you want. Go as heavy or as lightly as you want. This is where you create depth and age in the paint and in the exposed wood areas. I used another small brush to get in the detailed areas within and around the moulds.
Wipe away with a clean paper towel as you go to create a beautiful, aged patina.
That’s it! Easy Peasy! Now sit back and admire all of your hard work. You now have an amazing piece of old world French art.
Thanks so much for joining me today! Happy creating!!